Shenzhen Laesent Technology Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Lai Steven
  • Company Name : Shenzhen Laesent Technology Co., Ltd.
  • Tel : 86-755-89576335
  • Fax : 86-755-82566735
  • Address : ,,#2922,Guoli Building,2nd Sun Asia Electronic City,Nothern Huaqiang Road,Shenzhen,China
  • Country/Region : China
  • Zip : 518031

RF Tester (3 axis) TES-593

RF Tester (3 axis) TES-593
Product Detailed
Related Categories:Testing Equipment
R F Tester(3 axis) TES-593 1).Frequency Range:10 MHz to 8.0 GHz 2).Measurement Range:20mV/M-108.0V/m 3).Digital, triaxial
 TES- R F Tester(3 axis) TES-593
  
10 MHz to 8.0 GHz frequency range.For isotropic measurements of electromagnetic fields.Non-directional (isotropic ) measurement with three-channel measurement probe.High dynamic range due to three-channel digital results processing.Configurable alarm threshold and memory function.Easy to use
 
High frequency (RF) electromagnetic wave field strength measurement.Mobil phone base station antenna radiation power density measurement.Wireless communication applications (CW , TDMA , GSM , DECT).Wireless LAN (Wi-Fi) detection, installation.Spy camera, wireless bug finder.Cellular/Cordless phone radiation safety level.Microwave oven leakage detection.Personal living environment EMF safety.RF power measurement for transmitters.
  

ELECTRICAL SPECIFICATIONS

Sensor typeElectric field (E)
Frequency range10MHz to 8.0 GHz
Directional characteristicIsotropic, 3-dimensional
Measurement range (CW signal>50MHz)20mV/m to 108.0V/m
Absolute error(@1V/m and 50MHz)± 1.0dB
Frequency response (taking into account typ. CAL factor)± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviationType. ±1.0dB f>50 MHz
Overload limit4.2W/m2 (40 V/m)
Temperature response(0 to 50 )± 1.5dB
Note

Unless otherwise stated, all specifications hold under the following assumptions:

Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%.

GENERAL SPECIFICATIONS

Measurement methodDigital , triaxial measurement
Directional characteristicIsotropic, triaxial
Measurement range selectionOne continuous range
Display resolution0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting timeTypically 1s ( 0 to 90% of meas. value)
Display refresh rate

Typically 400mS

Display typeLCD 4 digit
Audible alarmBuzzer
Measurement unitsmV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display valueInstantaneous measured value, maximum value or average value since power-on.
Measurement average time (in per-set steps)4s to 15 minutes
Measurement alarm functionAdjustable threshold with ON/OFF
Measurement calibration factor CALAdjustable
Manual data memory and read storage99 sets ( only recall by meter )
Battery9V
Battery life>15 hours
Accessory9V battery, carrying case & manual

RF Tester (3 axis) TES-593



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.